W9SAR messages


fromtotime message
K0GDI W9SAR 07/12 03:22:07z Reply IS32. Anyway. I'm off to bed. 73.{BS}JV
K0GDI W9SAR 07/12 03:16:03z Reply many years. I emailed you another change you need to make on+{BR}JV
K0GDI W9SAR 07/12 03:15:24z Reply I can walk you through what you need to know. Been using IS32 for+{BQ}JV
K0GDI W9SAR 07/12 03:11:28z Reply built in TNC that decodes the APRS packet.{BP}JV
W9SAR K0GDI 07/12 03:09:18z Send another pumpkins{JV}BL
K0GDI W9SAR 07/12 03:08:47z Reply built in TNC that decodes the APRS packet.{BP}JU
W9SAR K0GDI 07/12 03:08:03z Send another i thought u were normally in bed by now we dont need no more+{JU}BL
K0GDI W9SAR 07/12 03:07:37z Reply The program does it all except decode the aprs packet. My HT has+{BO}JU
K0GDI W9SAR 07/12 03:06:00z Reply The program does it all except decode the aprs packet. My HT has+{BO}JT
W9SAR K0GDI 07/12 03:04:50z Send another j/k{JT}BL
K0GDI W9SAR 07/12 03:04:35z Reply The program does it all except decode the aprs packet. My HT has+{BO}JS
K0GDI W9SAR 07/12 03:03:40z Reply I use IS32 for Digipeater and Igate functions.{BN}JS
W9SAR K0GDI 07/12 03:03:32z Send another or i could google it and get even more confused LOLOLOLOLOL{JS}BL
K0GDI W9SAR 07/12 03:02:04z Reply I use IS32 for Digipeater and Igate functions.{BN}JR
K0GDI W9SAR 07/12 03:01:38z Reply Support[1/2]: ?APRSD ?APRSL ?APRSH ?APRSM ?APRSO ?APRSP ?APRSS
W9SAR K0GDI 07/12 03:01:26z Send another OK{JR}BL
K0GDI W9SAR 07/12 03:00:43z Reply Support[2/2]:?APRST/?PING? ?ABOUT/?APRSV/?VER ?CPU ?DX ?IGATE
W9SAR K0GDI 07/12 03:00:31z Send another ????
K0GDI W9SAR 07/12 03:00:27z Reply I use IS32 for Digipeater and Igate functions.{BN}JQ
W9SAR K0GDI 07/12 02:59:24z Send another so the digi is rf to is and the igate is is to rf////{JQ}BL
W9SAR K0GDI 07/12 02:58:48z Send another aw ok i may have to look at it in the future.... {JP}BL
K0GDI W9SAR 07/12 02:58:10z Reply I'm heading inside the house. TTYL 73.{BM}JO
W9SAR K0GDI 07/12 02:58:06z Send another u using is32 for ur digipeater or plex{JO}BL
K0GDI W9SAR 07/12 02:55:20z Reply I don't use anything but. It does everything. {BL}JN
K0GDI W9SAR 07/12 02:52:55z Reply APRSIS32{BK}JN
W9SAR K0GDI 07/12 02:50:01z Send another what program u useing for a digi{JN}BJ
K0GDI W9SAR 07/12 02:45:06z Reply Oh ok. Sounds good.{BJ}JM
W9SAR K0GDI 07/12 02:43:45z Send another hole nine yards on it i even have it setup for gps cord{JM}BH
K0GDI W9SAR 07/12 02:43:40z Reply Ok, I see you are WIDE2-2 now.{BI}JM
W9SAR K0GDI 07/12 02:42:29z Send another i use apbkgate externally and like it i can set the tx time and+{JL}BH
K0GDI W9SAR 07/12 02:42:04z Reply Ok, I see you are WIDE2-2 now.{BI}JL
K0GDI W9SAR 07/12 02:40:59z Reply Ok, I see you are WIDE2-2 now.{BI}JK
K0GDI W9SAR 07/12 02:39:35z Reply Oh ok. I like to have full Digi/Igate.{BH}JK
W9SAR K0GDI 07/12 02:39:20z Send another that tx alot i use it with my ht alot{JK}BG
W9SAR K0GDI 07/12 02:38:38z Send another i dont have a igate setup now i just have the fullblown digipeater+{JJ}BG
K0GDI W9SAR 07/12 02:36:46z Reply RR.{BG}JI
W9SAR K0GDI 07/12 02:36:30z Send another ok just seen ur email and let me change that{JI}BF
K0GDI W9SAR 07/12 02:06:02z Reply Since you are in da boonies too, change your path to WIDE2-2{BF}
K0GDI W9SAR 07/12 02:01:06z Reply Check your email. I sent you a couple settings for APRSIS32{BE}
K0GDI W9SAR 07/12 01:59:43z Reply Check your email. I sent you a couple settings for APRSIS32{ID}JH
K0GDI W9SAR 07/12 01:59:24z Reply Check your email. I sent you a couple settings for APRSIS32{IC}JH
W9SAR K0GDI 07/12 01:58:03z Send another what u up to mr 350 watt 2m man{JH}
K0GDI W9SAR 07/12 01:52:58z Reply Amp finally came.{IB}
K0GDI W9SAR 07/11 23:52:22z Reply station working better.{IA}
K0GDI W9SAR 07/11 23:45:03z Reply I sent you an email. You need a couple changes to get your+{HZ}
K0GDI W9SAR 07/11 23:40:16z Reply Testing this message through IS.{HY}
K0GDI W9SAR 07/11 23:38:48z Reply swap out and in the amps.{HX}
K0GDI W9SAR 07/11 23:38:44z Reply the powerpole crimper ready, so it shouldn't take but 5 minutes to+{HW}
K0GDI W9SAR 07/11 23:38:19z Reply Got my webcam set up yesterday. UPS is getting closer. I have+{HV}
K0GDI W9SAR 07/11 23:35:30z Reply logging, then selecting igate and igateenabled{TD}JG
K0GDI W9SAR 07/11 23:31:33z Reply You need to enable your Igate. You do this by Enables, then+{TC}JG
W9SAR K0GDI 07/11 23:31:05z Send another its 2 different things me messageing u and the digi also tx{JG}SY
K0GDI W9SAR 07/11 23:26:39z Reply wide2-2{TB}JG
K0GDI W9SAR 07/11 23:22:45z Reply Since you are out in the sticks. I would change your path to+{TA}JG
K0GDI W9SAR 07/11 23:18:53z Reply I'm only using APRSIS32, my Kenwood D75 decodes the packets.{SZ}JG
K0GDI W9SAR 07/11 23:16:12z Reply I'm only using APRSIS32, my Kenwood D75 decodes the packets.{SZ}JF
W9SAR K0GDI 07/11 23:16:04z Send another ok i know this thing likes to tx alot LOL{JF}SY
K0GDI W9SAR 07/11 23:15:40z Reply I'm only using APRSIS32, my Kenwood D75 decodes the packets.{SZ}JE
K0GDI W9SAR 07/11 23:14:56z Reply My min time says 10 sec, and max is at 10 min{SY}JE
W9SAR K0GDI 07/11 23:14:52z Send another hmmmm{JE}SX
K0GDI W9SAR 07/11 23:14:24z Reply My min time says 10 sec, and max is at 10 min{SY}JD
K0GDI W9SAR 07/11 23:14:15z Reply I have not gotten my amp yet. Hopefully in the next hour.{SX}JD
K0GDI W9SAR 07/11 23:11:36z Reply Every 10 minutes.{SW}JD
W9SAR K0GDI 07/11 23:08:27z Send another what 3rd party software u useing{JD}SV
K0GDI W9SAR 07/11 23:08:23z Reply Every 10 minutes.{SW}JC
W9SAR K0GDI 07/11 23:07:37z Send another im set for min 330 sec and max at 30 min does that sound close{JC}
K0GDI W9SAR 07/11 23:07:36z Reply 3rd party software to do that unless I absolutely have to.{SV}JB
W9SAR K0GDI 07/11 23:05:56z Send another on ur genious beaconing under config how often are u beaconing{JB}
W9SAR K0GDI 07/11 23:04:22z Send another Hey r u paying attention{JA}
CQSRVR W9SAR 07/11 22:59:14z Reply No active groups.{VZ}UP
ANSRVR W9SAR 07/11 22:57:14z Reply Active Groups Query Disabled{QF}UO
W9SAR CQSRVR 07/11 22:56:14z Send another ?{UP}
W9SAR ANSRVR 07/11 22:56:14z Send another ?{UO}
W9SAR K0GDI 07/11 22:31:54z Send another u get ur amp in??????
K0GDI W9SAR 07/11 21:59:34z Reply full digi/igate within the program itself. I don't want to use+{SU}XR
W9SAR K0GDI 07/11 21:30:35z Send another hey i hear ya it has its quirks. pinpoint likes to lock up alot to{XR}ST
K0GDI W9SAR 07/11 21:30:03z Reply I just wish they would build more to PinPoint. I have to have+{ST}IC
W9SAR K0GDI 07/11 15:35:48z Send another because u can take it down to street level{IC}SS
W9SAR K0GDI 07/11 15:35:47z Send another yea i like google maps.... i think pinpoint uses google maps+{IB}SS
W9SAR K0GDI 07/11 15:26:27z Send another yea i know im on the is side now{IA}SS
K0GDI W9SAR 07/11 15:26:06z Reply Wish there was a way to use Google Maps. {SS}AF
W9SAR K0GDI 07/11 15:24:05z Send another yea im trying to get my maps now{AF}SR
K0GDI W9SAR 07/11 15:17:10z Reply Awesome, I take it you found a good working cable to interface. 73{SR}AW
W9SAR K0GDI 07/11 15:10:36z Send another im using my 710 with my interface and the laptop ok ttyl gotta run{AW}SQ
W9SAR K0GDI 07/11 15:09:52z Send another (thumbs up) good deal {AV}SQ
K0GDI W9SAR 07/11 15:09:18z Reply RR, Congrats on the DIGI.{SQ}AU
W9SAR K0GDI 07/11 15:08:52z Send another going also{AU}SP
K0GDI W9SAR 07/11 15:08:09z Reply Yup shows you on that rd.{SP}AT
W9SAR K0GDI 07/11 15:08:08z Send another ok let me know i dont have mapping on here yet but i have the digi+{AT}SO
K0GDI W9SAR 07/11 15:06:17z Reply Yup shows you on that rd.{SP}AT??
K0GDI W9SAR 07/11 15:06:07z Reply Yup shows you on that rd.{SP}AT??????bb??`???@`?`???@??`???@?????d@??:W9SAR :ackAT}SO
K0GDI W9SAR 07/11 15:05:42z Reply Let me check.{SO}AS
W9SAR K0GDI 07/11 15:05:28z Send another wow{AS}SN
K0GDI W9SAR 07/11 15:04:48z Reply power pole crimper.{SN}AR
W9SAR K0GDI 07/11 15:04:46z Send another yours{AR}SM
K0GDI W9SAR 07/11 15:04:30z Reply I'm just waiting on UPS to deliver the 350w amp and my 50/75A+{SM}AQ??
K0GDI W9SAR 07/11 15:04:09z Reply I'm just waiting on UPS to deliver the 350w amp and my 50/75A+{SM}AQ??????bb??`???@`?`???@??`???@?????d@??:W9SAR :ackAQ}SL
K0GDI W9SAR 07/11 15:03:59z Reply I'm just waiting on UPS to deliver the 350w amp and my 50/75A+{SM}AQ
W9SAR K0GDI 07/11 15:03:59z Send another does it show me on eblen hancock rd or can u go in that tight with+{AQ}SL
K0GDI W9SAR 07/11 15:02:43z Reply Awesome! {SL}AP