APRS Packet Errors for OK1LCD-8 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)Packet
20241223195350OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAO,OK1TI-10:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223195425OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAO,OK1TI-10:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223195927OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAO,OK1TI-10:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223202321OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAR,OK1KZE-1:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223202356OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAR,OK1KZE-1:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223202431OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAR,OK1KZE-1:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223220713OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAR,OK1KZE-1:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223220748OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAR,OK1KZE-1:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223220824OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAR,OK1KZE-1:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH
20241223220859OK1LCD-8>APT311,WIDE1-1,WIDE2-2,qAR,OK1KZE-1:!0000.00N/00000.00E(000/000/A=000000/Radka QRV OK0BNH