APRS Packet Errors for CA3LVK-10 (last 6 hours)

This table contains packets in which findU has detected an error. This is an automated system, no manual checking of these packets has been done. Most common cause of this is mistakes in entering the latitude/longitude into hard-coded digis, or positions of 0/0. If packets of yours appear here, and you have looked at it carefully and cannot find the error, look again. I've been watching these error messages in my log, and believe my parser is reasonably correct. Go get the APRS spec to be sure. If you have done that, and are CERTAIN the packet is a legal APRS packet, then it is possible that there is an error in my my parser. Only email me if you are absolutely, positively certain...ask yourself, would I bet $100!

time (UTC)	Packet
20241123111536	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.24V
20241123113036	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.23V
20241123134538	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.25V
20241123142215	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.24V
20241123143715	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.25V
20241123145216	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.23V
20241123150716	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.25V
20241123152216	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.25V
20241123162217	CA3LVK-10>APLRG1,TCPIP*,qAC,T2CHILE:!LoRa APRS iGate & WX Station QAP 145.260 Mhz. Batt=4.25V